DS2776G+
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Pitch | 0.4mm |
| Base Part Number | DS2776 |
| JESD-30 Code | R-XDSO-N14 |
| Function | Multi-Function Controller |
| Operating Supply Voltage | 9.2V |
| Number of Channels | 1 |
| Interface | 1-Wire |
| Max Supply Voltage | 9.2V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 120μA |
| Adjustable Threshold | YES |
| Supply Current-Max (Isup) | 0.3mA |
| Fault Protection | Over Current, Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 2 |
| Height | 800μm |
| Length | 5mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -20°C~70°C TA |
| Packaging | Tube |
| Published | 2011 |
DS2776G+ Overview
This package corresponds to 14-WFDFN Exposed Pad. POWER SUPPLY SUPPORT CIRCUIT is the analog IC that this power IC employs. There are 1 channels available. It has a total of 8 pins. The package contains a Tube case. This electronic component should be mounted using Surface Mount. The voltage supply for this electric component should not be less than 4V volts. The family name of this electrical component is Power Management Circuits. There is a electronic part mounted in the way of Surface Mount. It is recommended that the power management IC's supply voltage is 9.2V higher than 9.2V volts. It is capable of delivering the Multi-Function Controller functions. For the electronic part to perform properly, it should be operated at temperature -20°C~70°C TA. Lithium Ion/Polymer is a part of this electrical part's battery chemistry. It uses the DS2776 family as a base. Supply current (Isup) must not exceed 0.3mA. For this smart tools battery, the operating supply voltage is specified as being in the range of 9.2V. Powered by a 120μA supply current, it operates on minimal power.
DS2776G+ Features
Available in 14-WFDFN Exposed Pad Package
with 8 Pins
Mounting Type: Surface Mount
Battery Chemistry : Lithium Ion/Polymer
DS2776G+ Applications
There are a lot of Maxim Integrated DS2776G+ Battery Management ICs applications.
- Head up display (HUD)
- Robot vacuum cleaner
- Submarines
- Motor bikes
- Providing battery protection
- Distributed energy resources
- On-board battery charger
- Passenger boats
- 3-wheelers
- Wireless charging
