DS2784G+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS2784 |
| Function | Multi-Function Controller |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Interface | 1-Wire |
| Max Supply Voltage | 4.6V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 85μA |
| Adjustable Threshold | YES |
| Supply Current-Max (Isup) | 0.5mA |
| Fault Protection | Over Current, Over/Under Voltage, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Height | 800μm |
| Length | 5mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
DS2784G+ Overview
It is appropriate for the 14-WFDFN Exposed Pad package. The analog IC that this system battery utilizes is POWER SUPPLY SUPPORT CIRCUIT. As of right 1w, there are 1 channels available. There are 14 pins on it. It's packaged in a Tube case. The electrical component must be mounted with Surface Mount. Supply voltage should not fall below 2.5V volts for this electric component. Power Management Circuits is the family name of this electrical component. Surface Mount is in the way of this electronic component. Supply voltage shouldn't exceed 4.6V volts for this power IC. It is able to deliver the Multi-Function Controller functions. Temperatures in the -40°C~85°C TA range are ideal for this electronic part. Lithium Ion/Polymer is a part of this electrical part's battery chemistry. 3/5V volts power it. It is based on DS2784 family. Supply current (Isup) must not exceed 0.5mA. A supply current of 85μA volts is required to operate it.
DS2784G+ Features
Available in 14-WFDFN Exposed Pad Package
with 14 Pins
Mounting Type: Surface Mount
Battery Chemistry : Lithium Ion/Polymer
DS2784G+ Applications
There are a lot of Maxim Integrated DS2784G+ Battery Management ICs applications.
- Fork lifts
- Passenger cars
- PV timeshift
- Body ECU
- Golf cars
- Shuttle robots
- Electrical management protection
- PV inverter
- Motor drive - 3 phase AC100V-240V AC servo
- 3-wheelers
