DS2786BG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -20°C~70°C TA |
| Packaging | Tube |
| Published | 2010 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DS2786 |
| Function | Battery Monitor |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Interface | I2C |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 50μA |
| Adjustable Threshold | YES |
| Supply Current-Max (Isup) | 0.08mA |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
DS2786BG+ Overview
The 10-WFDFN Exposed Pad package is suitable for battery instrument. This power management IC utilizes an analog IC POWER SUPPLY SUPPORT CIRCUIT. Channels available are 1. 10 pins are attached to it. Tube is the case number of the package. You can mount this electronic part by using Surface Mount. The voltage supply for this electric component should not be less than 2.5V volts. The family name of this electrical component is Power Management Circuits. Surface Mount is in the way of this electronic component. Its supply voltage should not exceed 4.5V volts. It is able to deliver the Battery Monitor functions. Electronic parts perform best when operating at a temperature range of -20°C~70°C TA. This electronic part has a chemistry of Lithium Ion/Polymer. A 3/5V volt battery powers it. It is always recommended that this battery protection IC is set to 3.6V. A DS2786 family is used in it. The maximum supply current (Isup) must not exceed 0.08mA. Powered by a 50μA supply current, it operates on minimal power.
DS2786BG+ Features
Available in 10-WFDFN Exposed Pad Package
with 10 Pins
Mounting Type: Surface Mount
Battery Chemistry : Lithium Ion/Polymer
operate supply voltage at the range of 3.6V
DS2786BG+ Applications
There are a lot of Maxim Integrated DS2786BG+ Battery Management ICs applications.
- Providing battery protection
- Monitoring the battery
- Weather stations
- Wearables
- Park and garden
- Motor drive - 3 phase AC400V inverter
- A/C power substations
- Cell phone towers
- ADAS ECU
- Rear light with animation
