DS3658N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Number of Outputs | 4 |
| Qualification Status | COMMERCIAL |
| Output Type | Bipolar |
| Supply Voltage-Max (Vsup) | 5.25V |
| Current - Output (Max) | 600mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.75V~5.25V |
| Interface IC Type | AND GATE BASED PERIPHERAL DRIVER |
| Turn On Time | 0.5 µs |
| Output Peak Current Limit-Nom | 0.6A |
| Turn Off Time | 8 µs |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
DS3658N Overview
The LED driver's packaged as a Tube.There is a 16-DIP (0.300, 7.62mm) package that includes it.The lighting driver is mounted in the Through Hole position.This switch is of type General Purpose.To ensure reliable performance, the temperature should be set to 0°C~70°C TA.By default, it is set to output 4.Operation is based on a supply voltage of Not Required.A maximum voltage of Bipolar volts is available from the output of this LED driver.It contains 16 terminations.Currently, the lighting driver has a total of 1 functions.600mAV is the maximum output of the LED driver.High efficiency is possible at 5V supply voltage.In total, it has 16 pins.This LED driver is configured to have a maximum supply voltage of 5.25V (Vsup).Interface type AND GATE BASED PERIPHERAL DRIVER is used for this LED driving board.
DS3658N Features
Supplied from 5V
DS3658N Applications
There are a lot of Rochester Electronics, LLC DS3658N Power Switches ICs applications.
- Hot Swap
- Set-top-box
- Mobile Communication Devices
- Set-Top Boxes
- Hard Disk Drives
- Storage (HDDs, SSDs)
- PDAs
- HDD, SSD
- Hot Swap
- PC Cards
