DS3658N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DS3658 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Voltage | 70V |
| Output Type | Bipolar |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5.25V |
| Power Supplies | 5V |
| Nominal Supply Current | 85mA |
| Output Configuration | Low Side |
| Power Dissipation | 2.075W |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 500 ns |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 8 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.75V~5.25V |
| Interface IC Type | AND GATE BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 4 |
| Turn On Time | 0.5 µs |
| Output Peak Current Limit-Nom | 0.6A |
| Built-in Protections | TRANSIENT |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS3658N Overview
It's?packaged?in?the way?of?a?Tube.Package 16-DIP (0.300, 7.62mm) contains it.This lighting drivere has a mounting type of Through Hole.The switch type is General Purpose.To ensure reliable operation, set the temperature to 0°C~70°C TA.The lighting driver has a total of 4 outputs that are available for use.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of Bipolar volts on this LED driver.It belongs to the DS3658 family.A total of 16 terminations have been recorded.16 pins are used for operation.The LED driving board has a total of 1 functions.The maximum output current must drop to 600mA to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 5V.The LED driving board is equipped with a total of 16 pins.This results in a 600mA output current.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.5V is the power supply of the part.In order to maximize efficiency, the supply voltage should be set at 5.25V.An interface of type AND GATE BASED PERIPHERAL DRIVER is provided to the LED driving board.
DS3658N Features
Supplied from 5V
DS3658N Applications
There are a lot of Texas Instruments DS3658N Power Switches ICs applications.
- Solid State Drivers
- PDAs
- Set-top-box
- Set-Top Boxes
- Hot Swaps
- USB Protection
- Portable GPS Device
- Telecom and Network Systems
- Hard Disk Drives
- Wearable Devices
