DS4160P+
| Parameters | |
|---|---|
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TRI-STATE; ENABLE/DISABLE FUNCTION |
| HTS Code | 8542.39.00.01 |
| Subcategory | Other Oscillators |
| Technology | BIPOLAR |
| Supply Voltage | 3.3V |
| Frequency | 160MHz |
| Frequency Stability | 50 ppm |
| Physical Dimension | 5.0mm x 3.2mm x 1.49mm |
| Operating Frequency | 160MHz |
| Operating Supply Voltage | 3.3V |
| Rise Time-Max | 0.2ns |
| Fall Time-Max | 0.2ns |
| Symmetry-Max | 55/45% |
| Max Supply Voltage | 3.465V |
| Min Supply Voltage | 3.135V |
| Operating Supply Current | 74mA |
| Oscillator Type | LVPECL |
| Frequency Tolerance | 0.005% |
| Supply Current-Max | 95mA |
| Output Load | 50 OHM |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Number of Pins | 10 |
DS4160P+ Overview
Frequency 160MHz is set on the programmable timer.It is used to pack in Tube case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 74mA voltage. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. The types of oscillator includes LVPECL. The timer clock contains 10 pins. The digital timer's operating supply voltage is rated 3.3V voltage. The supply voltage of the programmable timer can rate 3.3V. You can read the timer clock's additional feature in the follwing: TRI-STATE; ENABLE/DISABLE FUNCTION. On operating frequency, it's available in the range of 160MHz. The digital timer has a frequency tolerance value of 0.005%. The number of the chip's terminations sums up to 10. Its subcategory belongs to Other Oscillators. The minimum supply voltage of the chip must not be lower than 3.135V. The supply voltage of this chip should not exceed 3.465V.
DS4160P+ Features
Operate frequency at 160MHz
Package / Case: Tube
Max Operating temperature at -40°C
Additional Feature: TRI-STATE; ENABLE/DISABLE FUNCTION
DS4160P+ Applications
There are a lot of Maxim Integrated DS4160P+ Programmable Timers & Oscillators applications.
- Clutch Actuator circuit
- Motor control
- Thermostats
- Periodic “Wake-Up” Call
- Tamper Detection
- Remote Data-Logger
- Watchdog Timers
- Low-Power Wireless
- Precision timing
- Intruder Detection
