DS4510U-10
| Parameters | |
|---|---|
| Reset | Active Low |
| Voltage - Threshold | 4.375V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.49V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.49V |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 400kHz |
| Base Part Number | DS4510 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Memory Size | 64B |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
DS4510U-10 Overview
There are 10 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tube model. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. Please find attached 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your reference in this IC power. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. There is a specification for the peak reflow temperature of the package to be 245. In a 5V supply voltage, the power management conducts. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 10 pins on the board. 10 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C TA degrees. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. You can always use DS4510, the base supervisor number, to search for similar PMICs of the manufacturer. In order to operate this power management, it requires 3/5V volts of power. Generally, this IC management works at a frequency of 400kHz, which is sufficient for most applications. In this IC power, there is a memory zone of 64B.
DS4510U-10 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
DS4510U-10 Applications
There are a lot of Maxim Integrated DS4510U-10 Voltage Supervisors applications.
- WiFi router
- Radio
- Power distribution systems of CCU
- Important electronics for automotive safety
- Functional modules
- Smartphones
- Dash board
- Leakage current detection
- Analog circuit
- Power distribution systems of ICU
