DS4510U-15
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DS4510 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Memory Size | 64B |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.125V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Min Reset Threshold Voltage | 4V |
| Max Reset Threshold Voltage | 4.24V |
| Undervoltage Threshold | 4V |
| Overvoltage Threshold | 4.24V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS4510U-15 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 10 in total. Tube-packaging is used. For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 240. During operation, the power ic is supplied with a voltage of 5V. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. A total of 10 pins are located on this power management. This power management has 10 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.7V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. You can always use DS4510, the base supervisor number, to search for similar PMICs of the manufacturer. The voltage supervisor requires a power source of 3/5V volts in order to work correctly. As a general rule, this IC management is designed to function at a frequency of 400kHz, which is sufficient for most applications. There are 64B of memory available for this IC power.
DS4510U-15 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
DS4510U-15 Applications
There are a lot of Maxim Integrated DS4510U-15 Voltage Supervisors applications.
- Functional modules
- Consumer electronics
- Low voltage/high power - AI, GPU
- Power communication system
- Rechargeable batteries
- Battery cars
- Electrical fire monitoring system
- Personal computers
- Display equipment
- Electric heating appliances
