DS75176BN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | DS75176 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Data Rate | 10 Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| ESD Protection | No |
| Receive Delay-Max | 37 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 22 ns |
| Number of Receivers | 1 |
| High Level Input Current-Max | 0.00002A |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS75176BN Overview
This LED driver IC features an enhanced 8-DIP (0.300, 7.62mm) package for driving common LEDs.The Tube package houses this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.Any Through Hole-type PCB or development board can be used with this wide receiver.Power supply requirements for this differential driver are 4.75V~5.25V.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.Driver ICs with a supply voltage range of 5V can operate efficiently.Integrated into this wide receiver are 8 terminations that are used for driving and receiving signals from data.This transceiver is packaged with 8 market standard pinoutsThe base part number DS75176 identifies the product type, temperature, package, etc., so you can search for more variants by using it.An enhanced power dissipation control driver IC featuring 8 pins.Its package size is drastically reduced by downsizing ICs and utilizing high-density Through Hole mounting techniques.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.This transceiver module is designed to operate from an input voltage supply of 5V.Line Driver or Receivers is a subcategory of this rf transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.The module isolated transceivers are 1 receivers.In the case of input current exceeding 55mA, this can transceiver may malfunction.
DS75176BN Features
Tube package
8 pin count
8 pins
5V power supply
DS75176BN Applications
There are a lot of Texas Instruments DS75176BN Drivers/Receivers/Transceivers applications.
- Switches
- Cell phones
- Single to Multimode Fiber Conversion
- Cable network front end
- Wireless smart house
- Satellite ground stations
- Automation systems
- SONET/SDH Network
- Aircraft positioning
- Gigabit Ethernet
