DS80C390-FNR+
| Parameters | |
|---|---|
| Speed | 40MHz |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3.85V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | 8051 |
| Peripherals | Power-Fail Reset, WDT |
| Clock Frequency | 40MHz |
| Program Memory Type | ROMless |
| Core Size | 8-Bit |
| Connectivity | CANbus, EBI/EMI, SIO, UART/USART |
| Supply Current-Max | 150mA |
| Bit Size | 8 |
| Has ADC | NO |
| DMA Channels | NO |
| PWM Channels | NO |
| DAC Channels | NO |
| Address Bus Width | 20 |
| External Data Bus Width | 8 |
| Number of UART Channels | 2 |
| ROM Programmability | MROM |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | 80C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DS80C390 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.35V |
| Oscillator Type | External |
| Number of I/O | 32 |
DS80C390-FNR+ Overview
It is available in the 64-LQFP package for the benefit of saving space. Using Surface Mount, it is mounted. It comes in a Tray package. Device with 8051 core processor issupported. In order to work effectively, the temperature should be kept at -40°C~85°C TA. It has a type of program memory of ROMless. 32 I/Os can be found on it. Based on the DS80C390 base part number, it can be compared with other components. At QUAD, it has its terminals. This circuit consists of 64 terminationals. This electrical component is part of the 80C series. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. A number of 64 pins are used to construct it. It is equipped with 64 pins in total. In the subcategory of Microcontrollers, this component is included. In this case, 150mA represents the maximum current supply. A 5V source is used for powering it. In the device, the clock runs at 40MHz. During normal operation, the supply voltage (Vsup) should be kept above 4.35V. It works with an oscillator type External.
DS80C390-FNR+ Features
64-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
DS80C390-FNR+ Applications
There are a lot of Maxim Integrated DS80C390-FNR+ Microcontroller applications.
- Instrument control
- Safety -airbags, automatic braking system (ABS)
- Christmas lights
- Hand-held metering systems
- Home appliances
- Accu-check
- Computed Tomography (CT scan)
- PDAs, game consoles
- Keyboards
- Magnetic resonance imaging (MRI)
