DS80C390-QCR+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 68-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 68 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2002 |
| Series | 80C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS80C390 |
| Pin Count | 68 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.35V |
| Oscillator Type | External |
| Number of I/O | 32 |
| Speed | 40MHz |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3.85V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | 8051 |
| Peripherals | Power-Fail Reset, WDT |
| Clock Frequency | 40MHz |
| Program Memory Type | ROMless |
| Core Size | 8-Bit |
| Connectivity | CANbus, EBI/EMI, SIO, UART/USART |
| Supply Current-Max | 150mA |
| Bit Size | 8 |
| Has ADC | NO |
| DMA Channels | NO |
| PWM Channels | NO |
| DAC Channels | NO |
| Address Bus Width | 20 |
| External Data Bus Width | 8 |
| Number of UART Channels | 2 |
| ROM Programmability | MROM |
| Height Seated (Max) | 4.57mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS80C390-QCR+ Overview
To save space, it is included in the 68-LCC (J-Lead) package. Surface Mount is used for mounting. A package of Tube contains it. With a processor of 8051 cores, the device is powered. The temperature should be kept at 0°C~70°C TA while working. The type of memory in which this program is stored is ROMless. There are 32 I/Os on the board. Based on the DS80C390 base part number, it can be compared with other components. At QUAD, its terminals are located. It consists of 68 terminationals. 80C is the series number of this electrical component. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. A total of 68 pins are required to construct this device. This device has a total of 68 pins. Microcontrollers contains this component. In this case, 150mA represents the maximum current supply. A 5V source is used for powering it. There is a clock running in the device at a frequency of 40MHz. In order to ensure normal operation, the supply voltage (Vsup) must remain above 4.35V. There is an oscillator type External used in this circuit.
DS80C390-QCR+ Features
68-LCC (J-Lead) package
Mounting type of Surface Mount
Microcontrollers subcategory
DS80C390-QCR+ Applications
There are a lot of Maxim Integrated DS80C390-QCR+ Microcontroller applications.
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Sonography (Ultrasound imaging)
- Toys
- Electrocardiogram (EKG)
- Guidance-GPS
- Digital set-top boxes
- Automatic control
- Set-top boxes
- Computer/laptop
- Medical instruments chromatographs
