DS87C520-MNL+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2001 |
| Series | 87C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS87C520 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | EBI/EMI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | External |
| Number of I/O | 32 |
| RAM Size | 1K x 8 |
| Memory Type | EPROM, OTP |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | 8051 |
| Peripherals | Power-Fail Reset, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | EBI/EMI, SIO, UART/USART |
| Bit Size | 8 |
| Access Time | 33 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Number of UART Channels | 1 |
| Height | 4.06mm |
| Length | 52.96mm |
| Width | 14.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS87C520-MNL+ Overview
Due to the benefits of saving space, it is available in the 40-DIP (0.600, 15.24mm) package. The way of mounting it is Through Hole. Tube is the package that contains it. Devices with 8051 core processors are available. Maintain a temperature of -40°C~85°C TA while working. Memory type OTP is used for program memory. 32 I/Os can be found on it. In order to find similar components, it has a base part number of DS87C520. This device has terminals at DUAL. As far as terminations are concerned, there are 40 terminations present. The 87C series contains this electrical component. The supply voltage of 5V allows for high efficiency. Storage of data is performed using memory type EPROM, OTP. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. There are 40 pins used in the construction of this device. During the mounting process, the device is mounted based on the Through Hole method. There are 40 pins on it. It falls under the category of Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 16kB. Power comes from a source of 5V. It is highly efficient when it works at a frequency of 33MHz. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. There are currently 3 timers/counters set up on the system. Using a External oscillator type, it works well.
DS87C520-MNL+ Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
DS87C520-MNL+ Applications
There are a lot of Maxim Integrated DS87C520-MNL+ Microcontroller applications.
- Vacuum cleaners
- Television
- Tape drives
- Smart highways (navigation, traffic control, information monitoring and car service)
- Safety -airbags, automatic braking system (ABS)
- Fabric
- Virtual reality VR robots
- Computed Tomography (CT scan)
- Electrocardiogram (EKG)
- Mobile computers
