DS89C430-MNL+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 89C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 33MHz |
| Base Part Number | DS89C430 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | EBI/EMI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | External |
| Number of I/O | 32 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | 8051 |
| Peripherals | Power-Fail Reset, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | EBI/EMI, SIO, UART/USART |
| Supply Current-Max | 110mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 33 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Address Bus Width | 16 |
| Number of Programmable I/O | 4 |
| Height Seated (Max) | 5.08mm |
| Length | 52.075mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS89C430-MNL+ Overview
There is an option to purchase it in the 40-DIP (0.600, 15.24mm) package, which saves space. It is mounted using the way of Through Hole. This item can be found in package Tube. The device runs in 8051 core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 32 I/Os on it, which makes it a very simple device. A comparable component can be found by using the base part number DS89C430. DUAL is the position of its terminals on the board. As far as terminations are concerned, there are 40 terminations present. In the 89C series, this electrical component is found. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. A number of 40 pins are used to construct it. Mounting is performed in accordance with Through Hole. There are 40 pins on it. It is one of the components included in Microcontrollers. In the device, there is a memory capacity of 16kB which may be used to store programs and data. Supply current cannot exceed 110mA. There is 5V power source in this device. The system is highly efficient when working at a frequency of 33MHz. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. In total, there are 3 timers and counters. There are 4 programmable I/Os. External is the oscillator type it uses.
DS89C430-MNL+ Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
DS89C430-MNL+ Applications
There are a lot of Maxim Integrated DS89C430-MNL+ Microcontroller applications.
- Communication-bluetooth, Wi-Fi, radio
- Electronic jamming systems
- Home appliances
- Washing machine
- Microwave ovens
- Copiers
- Heater/Fan
- Fabric
- Temperature sensing and controlling devices
- Hard drives
