DS90CF388VJD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -10°C |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 2.8W |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DS90CF388 |
| Pin Count | 100 |
| Output Type | TTL |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 8 |
| Temperature Grade | COMMERCIAL |
| Interface | LVDS |
| Nominal Supply Current | 250mA |
| Power Dissipation | 2.8W |
| Output Current | 2mA |
| Max Supply Current | 300mA |
| Propagation Delay | 500 ps |
| Max Output Voltage | 450mV |
| Data Rate | 5.38 Gbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Max Input Current | 15μA |
| Receiver Number of Bits | 8 |
| Number of Drivers | 48 |
| Supply Voltage1-Nom | 3.3V |
| Out Swing-Min | 2.7 V |
| Height | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS90CF388VJD/NOPB Overview
The 100-TQFPpackage is a good fit for this feature.This product comes in a Tray case.The component has been installed according to the Surface Mountmethod.An output voltage of 3V~3.6V volts can be provided by the device.Based on the [0], related parts can be found.This termination has 100terminations.You should set this device to 3.3V.In total, it consists of 100pins.100 pins are used for operation.The unit is mounted on Surface Mount.The device must operate at a minimum working temperature of -10°Cin order to be reliable.This value enables the part to run consistently with a maximum value of [0].There are electronic components in the Line Driver or Receivers family.Interface ICs operate at a voltage level of 3.3V volts.On the part, there are 48 drivers embedded.
DS90CF388VJD/NOPB Features
It is based on DS90CF388.
Set the part at 3.3V volts
with 48 Drivers
DS90CF388VJD/NOPB Applications
There are a lot of Texas Instruments DS90CF388VJD/NOPB Specialized Interface ICs applications.
- DVD-R
- Residential Gateways, Home Gateway/Router
- High reliability control systems
- Compatible with 65 V DACs and ADCs such as
- Existing multiplexer applications (both fault-protected and
- SDH/SONET multiplexers
- Medical/Industrial
- DSLAMs
- USB 1.1 signal switching circuits
- Isolation
