DS90CP22M-8
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Crosspoint Switch |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | DS90CP22 |
| Pin Count | 16 |
| Max Output Current | 10μA |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 2:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Interface | LVDS |
| Nominal Supply Current | 98mA |
| Throw Configuration | DPDT |
| Data Rate | 800 Mbps |
| Supply Type | Single |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 55ns |
| Switch-off Time-Max | 4.5ns |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS90CP22M-8 Overview
In order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).Tube is the packaging method.digital switch ic uses the method of Surface Mount for mounting.Crosspoint Switch is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.With a supply voltage of 3V~3.6V, designers have greater flexibility of digital controlled switch.As parts of its basic configuration, 16 terminations are desgined.To find signal switch's related components, a base part number of DS90CP22 may also be used.In this case, 3.3V is the voltage supplied to the multiplexer's system.A component pin count of 16 can be found on this turn signal switch.Conductors terminate at GULL WING in this design.There is a type of supply of Single.It is configured with 16 pins.This unit is mounted in the way of Surface Mount.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 3V.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.I would classify the digital switch ic as an electronic part belonging to the Multiplexer or Switches category.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 3.3V.A total of 2 transmission channels are available in the turn signal switch's circuit.
DS90CP22M-8 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
DS90CP22M-8 Applications
There are a lot of Texas Instruments DS90CP22M-8 Signal Switches / Multiplexers / Decoders applications.
- Encrypted communications system
- Solenoid cooling fan
- Data-routing applications
- Microprocessor input/output systems
- A/D converters
- Night vision cameras
- Analog, digital or video signal switching
- Textile mills
- Code converters
- Code conversion
