DS90CP22M-8/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Crosspoint Switch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | DS90CP22 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 2:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Data Rate | 800 Mbps |
| Supply Type | Digital |
| Power Consumption | 330W |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 55ns |
| Switch-off Time-Max | 4.5ns |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS90CP22M-8/NOPB Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).It is packaged in the way of Tube.Digital switch ic adheres to a mounting method of Surface Mount.The multiplexers uses an analog IC Crosspoint Switch as the analog part of the circuit.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 3V~3.6V, designers have superior flexibility.Its basic configuration includes terminations in the 16 range.There is a base part number DS90CP22 that can be used to locate signal switch's related components as well.For multiplexer's system, 3.3V voltage is supplied.This turn signal switch contains 16 component pins.As a result, conductors end at GULL WING.There is a type of supply of Digital.With 16 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.To avoid unnecessary failures, keep the supply voltage at 3V (Vsup).Keeping Vsup at 3.6V will prevent some unnecessary failures.Multiplexer or Switches is the classification for this the digital switch ic.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.The turn signal switch's circuit consists of 2 transmission channels.
DS90CP22M-8/NOPB Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Digital
Operating with the supply voltage of 3.3V
DS90CP22M-8/NOPB Applications
There are a lot of Texas Instruments DS90CP22M-8/NOPB Signal Switches / Multiplexers / Decoders applications.
- Metal detectors
- Data bus control
- Analog, digital or video signal switching
- Make full adder
- Analog to digital conversion
- Medical industry
- Memory chips
- Microprocessor instruction decoding
- Combinational circuit
- Microprocessor input/output systems
