DS90CP22MTX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Crosspoint Switch |
| Subcategory | Multiplexer or Switches |
| Technology | BIPOLAR |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | DS90CP22 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 2:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Operating Supply Current | 98mA |
| Data Rate | 800 Mbps |
| Supply Type | Single |
| Power Consumption | 330W |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 55ns |
| Switch-off Time-Max | 4.5ns |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS90CP22MTX/NOPB Overview
As a means of saving space, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) represents its packaging.The method digital switch ic adopts for mounting is Surface Mount.A digital IC Crosspoint Switch is used as the analog component of the multiplexers.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 3V~3.6V supply voltage.There are 16 terminations included in its basic configuration.In addition, it also has a base part number of DS90CP22, which can be used to find related parts.The multiplexer's system is supplied with a voltage of 3.3V.In this turn signal switch, there are 16 component pins.As a result, GULL WING represents the end of the conductors.This supply type employs Single.The board is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 3V.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.Multiplexer or Switches is the classification for this the digital switch ic.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.A total of 2 channels are used for transmission in the turn signal switch's circuit.Providing the load with a supply voltage of 98mA can maintain stability of the multiplexers.
DS90CP22MTX/NOPB Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
Operating with the supply current of 98mA
DS90CP22MTX/NOPB Applications
There are a lot of Texas Instruments DS90CP22MTX/NOPB Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- RF-based home automation system
- Electronically controlled engine system
- Code conversion
- Image transmission
- Microprocessor memory systems
- Control unit of Central Processing unit (CPU)
- Automatic health monitoring systems
- Enabling different rows of memory depending on address in memory chips
- Make full adder
