banner_page

DS90CR213MTD/NOPB

0.5mm 5V Specialized Interface IC DS90CR213 48 Pin 5V 48-TFSOP (0.240, 6.10mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-DS90CR213MTD/NOPB
  • Package: 48-TFSOP (0.240, 6.10mm Width)
  • Datasheet: -
  • Stock: 320
  • Description: 0.5mm 5V Specialized Interface IC DS90CR213 48 Pin 5V 48-TFSOP (0.240, 6.10mm Width) (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-TFSOP (0.240, 6.10mm Width)
Number of Pins 48
Packaging Tube
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 48
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Max Operating Temperature 70°C
Min Operating Temperature -10°C
Subcategory Line Driver or Receivers
Technology CMOS
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 3
Supply Voltage 5V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number DS90CR213
Pin Count 48
Qualification Status Not Qualified
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Power Dissipation 1.98W
Supply Current-Max 84mA
Data Rate 173 Mbps
Output Characteristics TOTEM-POLE
Differential Output YES
Output Polarity COMPLEMENTARY
Input Characteristics STANDARD
Interface IC Type LINE DRIVER
Interface Standard EIA-644; TIA-644
Number of Drivers 3
Number of Receivers 21
Height Seated (Max) 1.2mm
Length 12.5mm
Width 6.1mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

DS90CR213MTD/NOPB Overview


The 48-TFSOP (0.240, 6.10mm Width)package is a good fit for it.It is packaged in a Tube case.In the way of [0], this component is installed.The ability to supply 4.75V~5.25V volts is available with certain devices.Based on the [0], it is possible to locate related parts.It consists of 48terminations.Make sure that this device is set to 5V.There are a total of 48 pins on it.Operation is performed through the 48pins.This is mounted by Surface Mount.A minimum working temperature of -10°Cis required to ensure the reliability of the device.As long as the maximum value is [0], the part runs consistently.This electronic component belongs to the family of [0].ICs used in interfaces are operated at a supply voltage of 5V.The device can deliver voltage at 5V volts.This part uses interface IC type LINE DRIVER.A total of 3drivers are embedded on the component.

DS90CR213MTD/NOPB Features


It is based on DS90CR213.
Set the part at 5V volts
Interface IC Type : LINE DRIVER
with 3 Drivers

DS90CR213MTD/NOPB Applications


There are a lot of Texas Instruments DS90CR213MTD/NOPB Specialized Interface ICs applications.

  • Battery-powered systems
  • Isolation
  • T1/E1 Terminals
  • Avionics and Military Systems
  • E1 Multiplexer
  • Data switching
  • USB 1.1 signal switching circuits
  • PCMCIA cards
  • New designs requiring multiplexer functions
  • Communication systems

Write a review

Note: HTML is not translated!
    Bad           Good