DS90CR217MTD/NOPB
| Parameters | |
|---|---|
| Supply Voltage1-Nom | 3.3V |
| Number of Receivers | 21 |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | 5A991.B.1 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -10°C |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 1.98W |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DS90CR217 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Power Dissipation | 1.98W |
| Max Supply Current | 57mA |
| Max Output Voltage | 450mV |
| Data Rate | 1.785 Gbps |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Input Characteristics | STANDARD |
| Power Consumption | 129W |
| Interface IC Type | LINE DRIVER |
| Max Input Current | 15μA |
| Interface Standard | EIA-644; TIA-644 |
| Number of Drivers | 3 |
DS90CR217MTD/NOPB Overview
The 48-TFSOP (0.240, 6.10mm Width)package would be a good match for it.The item is packaged in a Tube case.The component is installed according to Surface Mount.It is possible to obtain devices that supply 3V~3.6V volts.A DS90CR217can be used to identify related parts.In total, there are 48terminations.It is important to note that this device should be set to 3.3V.In total, there are 48pins on the board.Operation is performed via the 48pins.The device is mounted by Surface Mount.It operates at a minimum working temperature of -10°C to ensure reliability.As long as the maximum value is [0], the part runs consistently.Electronic components from the family Line Driver or Receiversare used.Interface ICs operate at a voltage level of 3.3V volts.A LINE DRIVERtype interface IC is used in this part.There are 3 drivers embedded in the part.
DS90CR217MTD/NOPB Features
It is based on DS90CR217.
Set the part at 3.3V volts
Interface IC Type : LINE DRIVER
with 3 Drivers
DS90CR217MTD/NOPB Applications
There are a lot of Texas Instruments DS90CR217MTD/NOPB Specialized Interface ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- Short/Medium Loop: approximately 2000 ft. of 26 AWG,
- Power routing
- Battery-powered systems
- Audio and video routing
- ?Digital access cross connects
- and 5 REN loads
- Fiber–Fiber In The Loop (FITL), Fiber to the Home
- ?Cable Telephony – NIU, Set-Top Box, Home Side Box,
- Medical systems
