DS90CR218AMTD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | 5A991.B.1 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -10°C |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 1.89W |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DS90CR218 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 3 |
| Temperature Grade | COMMERCIAL |
| Nominal Supply Current | 115mA |
| Power Dissipation | 1.89W |
| Max Supply Current | 115mA |
| Data Rate | 1.785 Gbps |
| Differential Output | NO |
| Output Polarity | TRUE |
| Input Characteristics | DIFFERENTIAL |
| Power Consumption | 297W |
| Interface IC Type | LINE RECEIVER |
| Max Input Current | 15μA |
| Receiver Number of Bits | 3 |
| Interface Standard | EIA-644; TIA-644 |
| Number of Drivers | 21 |
| Supply Voltage1-Nom | 3.3V |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS90CR218AMTD/NOPB Overview
It's a good fit for the 48-TFSOP (0.240, 6.10mm Width) package.It comes in a Tube case.In this case, this component is installed in accordance with Surface Mount.It is capable of supplying a voltage of 3V~3.6V.Based on the [0], it is possible to locate related parts.This termination has 48terminations.It is recommended that you set this device to 3.3V.In total, it consists of 48pins.In order to operate, we use the 48pins.Currently, Surface Mountis mounting it.The unit operates at a minimum working temperature of -10°Cin order to ensure reliable operation.When 70°Cis the maximum value, the part will run consistently.Electronic components from the family Line Driver or Receiversare used.This interface IC operates at a voltage of 3.3V.This part uses interface IC type LINE RECEIVER.On the part, there are 21 drivers embedded.
DS90CR218AMTD/NOPB Features
It is based on DS90CR218.
Set the part at 3.3V volts
Interface IC Type : LINE RECEIVER
with 21 Drivers
DS90CR218AMTD/NOPB Applications
There are a lot of Texas Instruments DS90CR218AMTD/NOPB Specialized Interface ICs applications.
- Battery-powered systems
- Isolation
- Sample hold systems
- PCMCIA cards
- Digital Cross-Connects
- Low-Voltage
- Short/Medium Loop: approximately 2000 ft. of 26 AWG,
- Cable Modem, Cable PC
- Video signal routing
- Cross Connects
