DS90LV001TLD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Applications | LVDS |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 726mW |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DS90LV001 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Nominal Supply Current | 70mA |
| Power Dissipation | 726mW |
| Max Supply Current | 70mA |
| Propagation Delay | 2 ns |
| Turn On Delay Time | 2 ns |
| Current - Supply | 47mA |
| Max Output Voltage | 450mV |
| Logic Function | Buffer |
| Differential Output | YES |
| Input | CML, LVDS, LVPECL |
| Power Consumption | 155W |
| Driver Number of Bits | 1 |
| Max Input Current | 10μA |
| Receiver Number of Bits | 1 |
| Interface Standard | EIA-644-A; TIA-644-A |
| Data Rate (Max) | 800Mbps |
| Supply Voltage1-Nom | 3.3V |
| Out Swing-Min | 0.25 V |
| Delay Time | 1.4ns |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS90LV001TLD/NOPB Overview
Several packaging options are available for convenient transportation, including 8-WFDFN Exposed Pad.In Tape & Reel (TR) packages, ready for power buffer.Easily adaptable Surface Mount universal mouthpiece.A Buffer, ReDriver is a typical type.It uses 3V~3.6V voltage for its operation, so it does not require batteries.It facilitates input from CML, LVDS, LVPECL sources.In order to prevent malfunctions, the operating temperature should be set to -40°C~85°C.The operational amplifier buffer is targeted at applications such as LVDS and others.Search with "DS90LV001" to get more pin-to-pin solutions.An op amp buffer of the op amp buffer is equipped with 8 terminals.There is a maximum reflow temperature of 260 for the op amp buffers.It is capable of completing a wide range of tasks with the 3.3V voltage supplied.Taking the Power buffer's pinout as an example, it starts from the 8 pins it has on its surface.8 pins are included in it.47mA op amp buffers, they are.This board has a Surface Mount hole for mounting on a PCB or other board.In addition to the power buffer, other Line Driver or Receivers also play an important role.It is necessary to provide 3.3V operating supply voltage for normal operation.1-Bit receivers are used in this repeter.There is a maximum dissipation of 726mW of power from this splitter.Normal supply current for the splitter is 70mA.A 1 element interface repeater signal such as this is used.
DS90LV001TLD/NOPB Features
Mainly used in LVDS.
A standard Line Driver or Receivers.
1-Bit receiver.
DS90LV001TLD/NOPB Applications
There are a lot of Texas Instruments DS90LV001TLD/NOPB Signal Buffers, Repeaters, Splitters applications.
- Data or Clock Signal Amplification
- Clock Distribution
- SATA SSDs or HDDs
- Communications Switchers
- Cellular Phone Base Stations
- Medical
- Industrial PCs
- Multidrop Buses
- PECL-to-LVDS Translation
- Cable Repeaters
