DS90LV804TSQX/NOPB
| Parameters | |
|---|---|
| Receiver Number of Bits | 4 |
| Interface Standard | GENERAL PURPOSE |
| Data Rate (Max) | 800Mbps |
| Out Swing-Min | 0.25 V |
| Delay Time | 2.0ns |
| Capacitance - Input | 3.5pF |
| Height | 800μm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | 5A991.B.1 |
| Type | Buffer, ReDriver |
| Terminal Finish | Matte Tin (Sn) |
| Applications | LVDS |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 4.16W |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Base Part Number | DS90LV804 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Operating Supply Current | 140mA |
| Power Dissipation | 4.16W |
| Propagation Delay | 3.2 ns |
| Turn On Delay Time | 3.2 ns |
| Logic Function | Buffer |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Input | CML, LVDS, LVPECL |
| Output Polarity | COMPLEMENTARY |
| Power Consumption | 385W |
| Driver Number of Bits | 4 |
DS90LV804TSQX/NOPB Overview
Packaged in 32-WFQFN Exposed Pad for power buffer easy transportation.Power buffer is ready to ship in a package of Tape & Reel (TR).An easy-to-adjust universal mout.Typical Buffer, ReDriver type.3.15V~3.45V voltage is used to power this op amp buffer.Hence, it facilitates the entry of CML, LVDS, LVPECL into the system.To avoid malfunctions, you should set the operating temperature to -40°C~85°C.The objective of this operational amplifier buffer is to serve applications in the LVDS domain and other areas as well.For more pin-to-pin solutions, try "DS90LV804".There are two 32 terminals on the op amp buffer and you can find them at the end of the op amp buffer.The peak reflow temperature of the material is 260.When powered by 3.3V voltage, this splitter is capable of carrying out a number of demanding tasks.Power buffer pinouts start from 32 pins.32 pins are present on the op amp buffers.This board has a Surface Mount hole for mounting on a PCB or other board.The power buffer and other Line Driver or Receivers play an important role in the industry.The power buffer is powered by 140mA voltage.During normal operation, 3.3V operating voltage is required.There is a 4-Bit receiver used in it.There is a maximum power dissipation of 4.16W for this splitter.A 4 element interface repeater signal such as this is used.
DS90LV804TSQX/NOPB Features
Mainly used in LVDS.
A standard Line Driver or Receivers.
4-Bit receiver.
DS90LV804TSQX/NOPB Applications
There are a lot of Texas Instruments DS90LV804TSQX/NOPB Signal Buffers, Repeaters, Splitters applications.
- Network Switches/Routers
- Industrial/Embedded PC
- Storage Area Networks
- Medical
- Clock Distribution
- Loopback
- SATA SSDs or HDDs
- Communications Switchers
- Cellular Phone Base Stations
- Digital Crossconnects
