DS92001TMA
| Parameters | |
|---|---|
| Nominal Supply Current | 50mA |
| Power Dissipation | 726mW |
| Propagation Delay | 2 ns |
| Turn On Delay Time | 2 ns |
| Input | CML, LVDS, LVPECL |
| Power Consumption | 165W |
| Driver Number of Bits | 1 |
| Interface Standard | EIA-644-A; TIA-644-A |
| Data Rate (Max) | 400Mbps |
| Out Swing-Min | 0.25 V |
| Delay Time | 1.4ns |
| Height | 1.45mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | BLVDS |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 726mW |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | DS92001 |
| Output | LVDS |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Operating Supply Current | 65mA |
DS92001TMA Overview
The package is packed in 8-SOIC (0.154, 3.90mm Width) for convenient transportation of power buffer.There are Tube packages ready for shipping, and this power buffer is in one of them.The Surface Mount universal mout has the advantage of being easily adaptable.This is one of the most common type of Buffer, ReDriver that can be found.For this op amp buffer to function, it requires 3V~3.6V voltage.As a result, it facilitates CML, LVDS, LVPECL input.It is recommended to set the operating temperature to -40°C~85°C to avoid any malfunctions.It is designed for use by BLVDS as well as other applications.With "DS92001," you will find more pin-to-pin solutions.An op amp buffer with 8 terminals can be found on the left side of the op amp buffer.Reflow temperature is 235 at its peak.The splitter is supplied with 3.3V voltage, so it is capable of completing a wide range of demanding tasks.Taking the Power buffer's pinout as an example, it starts from the 8 pins it has on its surface.It outputs in LVDS.In addition, it has 8 pins.A Surface Mount hole allows it to be mounted on a PCB or other board.In addition to the power buffer, other Line Driver or Receivers also play an important role.This power buffer operates from a voltage of 65mA.It is necessary for 3.3V operating supply voltage to function normally.At most, this splitter dissipates 726mW watts of power.Normal supply current for the splitter is 50mA.A 1 element interface repeater signal is shown here.
DS92001TMA Features
Mainly used in BLVDS.
A standard Line Driver or Receivers.
DS92001TMA Applications
There are a lot of Texas Instruments DS92001TMA Signal Buffers, Repeaters, Splitters applications.
- Protection Switching
- SATA SSDs or HDDs
- Network Switches/Routers
- Test Equipment
- Laptop Computers (for External Video Cards)
- Digital Cross-Connects
- Loopback
- Servers
- Communications Switchers
- Cellular Phone Base Stations
