DSP56F803BU80E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | 56F8xx |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSP56F803 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Oscillator Type | External |
| Number of I/O | 16 |
| Speed | 80MHz |
| RAM Size | 2K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | 56800 |
| Peripherals | POR, PWM, WDT |
| Clock Frequency | 80MHz |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | CANbus, EBI/EMI, SCI, SPI |
| Supply Current-Max | 152mA |
| Bit Size | 16 |
| Data Converter | A/D 8x12b |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 16 |
| Format | FIXED POINT |
| RAM (words) | 2048 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
DSP56F803BU80E Description
DSP56F803BU80E is a member of a family of processors based on 56800 cores. It combines the processing power of DSP with the functions of microcontrollers and a flexible set of peripherals on a single chip, creating a highly cost-effective solution. Because of its low cost, flexible configuration and compact program code, 56F803 is very suitable for many applications. The 56F803 includes many peripherals particularly suitable for applications such as motion control, smart appliances, pedals, encoders, tachometers, limit switches, power and control, automotive control, engine management, noise suppression, remote utility metering and power, lighting and automation industrial control applications. The 56800 kernel is based on a Harvard-style architecture and consists of three execution units of parallel operations, allowing up to six operations per instruction cycle. The MCU-style programming model and optimized instruction set allow efficient, compact device and control code to be generated directly. This instruction set is also very efficient for C compilers to support the rapid development of optimization control applications.
DSP56F803BU80E Applications
motion control
smart appliances
Steppers
Encoders
Tachometers
limit switches
power supply and control
automotive control
engine management
Suppression
remote utility metering
industrial control for power
lighting, and automation
DSP56F803BU80E Features
based on a Harvard-style architecture consisting of three execution units operating in Parallel
allowing as many as six operations per instruction cycle
allow straightforward generation of efficient, compact device and control code
highly efficient for C compilers to enable rapid development of optimized control applications
