banner_page

DSPIC30F1010-20E/MM

6KB 2K x 24 FLASH dsPIC 16-Bit Microcontroller dsPIC? 30F Series DSPIC30F1010 28 Pin 20MHz 5V 28-VQFN Exposed Pad


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-DSPIC30F1010-20E/MM
  • Package: 28-VQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 876
  • Description: 6KB 2K x 24 FLASH dsPIC 16-Bit Microcontroller dsPIC? 30F Series DSPIC30F1010 28 Pin 20MHz 5V 28-VQFN Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-VQFN Exposed Pad
Number of Pins 28
Operating Temperature -40°C~125°C TA
Packaging Tube
Published 2006
Series dsPIC™ 30F
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
Terminal Finish Matte Tin (Sn) - annealed
Additional Feature IT ALSO OPERATES IN 15 MIPS AT 3V MINIMUM
Subcategory Digital Signal Processors
Technology CMOS
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Supply Voltage 5V
Terminal Pitch 0.65mm
Frequency 20MHz
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number DSPIC30F1010
Pin Count 28
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3/5V
Supply Voltage-Min (Vsup) 4.5V
Interface I2C, IrDA, LIN, SPI, UART, USART
Memory Size 6kB
Oscillator Type Internal
Number of I/O 21
RAM Size 256 x 8
Voltage - Supply (Vcc/Vdd) 3V~5.5V
uPs/uCs/Peripheral ICs Type MICROCONTROLLER, RISC
Core Processor dsPIC
Peripherals Brown-out Detect/Reset, POR, PWM, WDT
Program Memory Type FLASH
Core Size 16-Bit
Program Memory Size 6KB 2K x 24
Connectivity I2C, IrDA, LINbus, SPI, UART/USART
Supply Current-Max 193mA
Bit Size 16
Data Converter A/D 6x10b
Has ADC YES
DMA Channels NO
Data Bus Width 16b
PWM Channels YES
DAC Channels YES
Number of Timers/Counters 2
On Chip Program ROM Width 24
Format FIXED-POINT
RAM (words) 128
Height Seated (Max) 1mm
Length 6mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

DSPIC30F1010-20E/MM Overview


Due to the benefits of saving space, it is available in the 28-VQFN Exposed Pad package. The way of mounting it is Surface Mount. Tube is the package that contains it. Device with dsPIC core processor issupported. When working, the temperature should be kept at -40°C~125°C TA. In terms of its program memory type, it is FLASH. A total of 21 I/Os are available on this device. It has a part number of DSPIC30F1010 that can be used to locate similar components. This device has terminals at QUAD. 28 terminationals are present. The dsPIC? 30F series contains this electrical component. Using the 5V supply voltage allows for high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. 28 pins are used to construct it. Based on the Surface Mount method, it is mounted. This device has a total of 28 pins. This component is a part of Digital Signal Processors. In order to store data and programs, the devices have a memory size of 6kB. The maximum supply current is set at 193mA. Powered by a 3.3/5V source. The system is highly efficient when working at a frequency of 20MHz. 2 timer/counters are present. The property IT ALSO OPERATES IN 15 MIPS AT 3V MINIMUM is also present in it. Vsup should be kept above 4.5V for normal operation. Using an oscillator type of Internal, it works.

DSPIC30F1010-20E/MM Features


28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory

DSPIC30F1010-20E/MM Applications


There are a lot of Microchip Technology DSPIC30F1010-20E/MM Microcontroller applications.

  • Leakage current tester
  • Computer/laptop
  • Information appliances (networking of household appliances)
  • Computed Tomography (CT scan)
  • Wastewater treatment
  • Removable disks
  • Hard drives
  • Kindle
  • Fax machines
  • Copiers

Write a review

Note: HTML is not translated!
    Bad           Good