DSPIC30F1010-20E/SP
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | DSPIC30F1010 |
| Pin Count | 28 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3.3/5V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 6kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 6KB 2K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| RAM (words) | 128 |
| Number of ADC Channels | 6 |
| Number of PWM Channels | 2 |
| Height | 3.43mm |
| Length | 35.18mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
DSPIC30F1010-20E/SP Overview
Due to its space-saving qualities, it is available in the 28-DIP (0.300, 7.62mm) package. Mounted using Through Hole. Tube is the package that contains it. Devices with dsPIC core processors are available. The temperature should be kept at -40°C~125°C TA while working. There is FLASH program memory in it. It has a number of 21I/Os. Based on its base part number of DSPIC30F1010, other similarly-sized components can be found. The position of the device is DUAL at terminal. A 28 termination is contained within it. The electrical component is part of the series dsPIC? 30F. The supply voltage of 5V allows for high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. A number of 28 pins are used to construct it. Based on the Through Hole method, it is mounted. On it, there are 28 pins. Digital Signal Processors contains this component. Data and programs can be stored on the devices with a memory size of 6kB. Powered by a 3.3/5V source. It performs extremely well at a frequency of 20MHz. A designer is able to make full use of the adaptability and supply voltage of 5.5V by using it. Internal is the oscillator type it uses.
DSPIC30F1010-20E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F1010-20E/SP Applications
There are a lot of Microchip Technology DSPIC30F1010-20E/SP Microcontroller applications.
- Communication-bluetooth, Wi-Fi, radio
- Smart instruments
- Current meter
- Wastewater treatment
- Dialysis machines (performs function of liver)
- Automatic staplers
- Medical instruments chromatographs
- Leakage current tester
- Teletext terminals
- Digital TVs
