DSPIC30F1010-30I/MM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F1010 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 6kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 6KB 2K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 2 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 128 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC30F1010-30I/MM Overview
For space savings, it is available in the 28-VQFN Exposed Pad package. Using Surface Mount, it is mounted. This item can be found in package Tube. Device with dsPIC core processor issupported. When working, the temperature should be kept at -40°C~85°C TA. FLASH is its program memory type. A total of 21 I/Os are present. A component with the same part number as DSPIC30F1010 can be compared to other similar components. The position of the device is QUAD at terminal. 28 terminations are present in it. dsPIC? 30F is the series number of this electrical component. The 5V supply voltage enables high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. There are 28 pins used in the construction of this device. The mounting of this device is carried out following the method of Surface Mount. 28 pins are on it in total. The component is included in Digital Signal Processors. It is possible to store programs and data on the devices, as they have a memory size of 6kB. There is 3.3/5V power source in this device. Using a frequency of 30MHz, it is very efficient. A total of 2 timers/counters are present. Normal operation requires a supply voltage (Vsup) that is higher than 4.5V. Internal is the oscillator type it uses.
DSPIC30F1010-30I/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F1010-30I/MM Applications
There are a lot of Microchip Technology DSPIC30F1010-30I/MM Microcontroller applications.
- Communication-bluetooth, Wi-Fi, radio
- Blenders
- Virtual reality VR robots
- Walkie talkies
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Data acquisition and control
- Electromechanical control
- Computed Tomography (CT scan)
- Embedded gateways
- Auto-breaking system
