Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
28-DIP (0.300, 7.62mm) |
Number of Pins |
28 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2006 |
Series |
dsPIC™ 30F |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Digital Signal Processors |
Technology |
CMOS |
Terminal Position |
DUAL |
Supply Voltage |
5V |
Frequency |
30MHz |
Base Part Number |
DSPIC30F1010 |
Pin Count |
28 |
Operating Supply Voltage |
5V |
Interface |
I2C, IrDA, LIN, SPI, UART, USART |
Memory Size |
6kB |
Oscillator Type |
Internal |
Number of I/O |
21 |
RAM Size |
256 x 8 |
Voltage - Supply (Vcc/Vdd) |
3V~5.5V |
uPs/uCs/Peripheral ICs Type |
MICROCONTROLLER, RISC |
Number of Bits |
16 |
Core Processor |
dsPIC |
Peripherals |
Brown-out Detect/Reset, POR, PWM, WDT |
Program Memory Type |
FLASH |
Core Size |
16-Bit |
Program Memory Size |
6KB 2K x 24 |
Connectivity |
I2C, IrDA, LINbus, SPI, UART/USART |
Bit Size |
16 |
Data Converter |
A/D 6x10b |
Has ADC |
YES |
DMA Channels |
NO |
Data Bus Width |
16b |
Number of Timers/Counters |
2 |
Density |
48 kb |
Number of A/D Converters |
1 |
Format |
FIXED-POINT |
RAM (words) |
128 |
Number of ADC Channels |
6 |
Number of PWM Channels |
4 |
Height |
3.43mm |
Length |
35.18mm |
Width |
7.49mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
DSPIC30F1010-30I/SP Overview
As a result, it is available in the 28-DIP (0.300, 7.62mm) package. It is mounted using the way of Through Hole. Tube is the package that contains it. There is a dsPIC as core processor in this device. Maintain a temperature of -40°C~85°C TA while working. FLASH is the type of program memory used by it. 21 I/Os are present on the device. Other components that are comparable to it have the base part number DSPIC30F1010. DUAL is the location of its terminals. It consists of 28 terminationals. The electrical component is part of the series dsPIC? 30F. The 5V supply voltage enables high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. For its construction, 28 pins are used. A method of mounting is used, which is Through Hole. It has a total of 28 pins on it. It is one of the components included in Digital Signal Processors. The devices have a memory size of 6kB that can be used to store programs and data. This device achieves excellent efficiency at frequencies of 30MHz. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. There are 2 timers/counters. An oscillator type Internal is required for it to work.
DSPIC30F1010-30I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F1010-30I/SP Applications
There are a lot of Microchip Technology DSPIC30F1010-30I/SP Microcontroller applications.
- Oil and gas
- Keyboards
- Xbox
- Tape drives
- Coffee machines
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Guidance-GPS
- Walkie talkies
- Wastewater treatment
- Missile control