DSPIC30F2010-20E/MM
| Parameters | |
|---|---|
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| EEPROM Size | 1K x 8 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 512 |
| Number of ADC Channels | 6 |
| Number of External Interrupts | 3 |
| Number of I2C Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Height | 950μm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F2010 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
DSPIC30F2010-20E/MM Overview
There is a 28-VQFN Exposed Pad package available to save space. The way of Surface Mount is used to mount it. It is available in the Tube package. The device runs in dsPIC core processor. Working at -40°C~125°C TA temperature is recommended. The type of memory it uses is FLASH. There are 20 I/Os on it. Other components that are comparable to it have the base part number DSPIC30F2010. This device has terminals at QUAD. It consists of 28 terminationals. Part of the dsPIC? 30F series, this electrical component is used in a variety of applications. The supply voltage of 5V allows for high efficiency. This gadget has DIGITAL SIGNAL PROCESSOR, OTHER as its uPs/uCs/Peripheral IC. It is constructed using 28 pins. This mount is done in accordance with the method of Surface Mount. In total, it has 28 pins. This component is a part of Digital Signal Processors. The devices have a memory size of 12kB that can be used to store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. In total, there are 3 timers and counters. For normal operation, the supply voltage (Vsup) should be kept above 3V. An oscillator type Internal is required for it to work.
DSPIC30F2010-20E/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F2010-20E/MM Applications
There are a lot of Microchip Technology DSPIC30F2010-20E/MM Microcontroller applications.
- Speed meter
- Magnetic resonance imaging (MRI)
- Smoke alarms
- Security systems
- Industrial robot
- Vacuum cleaners
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Light sensing & controlling devices
- Christmas lights
- Calculator
