DSPIC30F2010-20I/MM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F2010 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Data Bus Width | 16b |
| Number of Timers/Counters | 3 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | TS 16949 |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 512 |
| Number of External Interrupts | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F2010-20I/MM Overview
For space savings, it is available in the 28-VQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. You can find it in the package of Tube. Devices with dsPIC core processors are available. In order to work effectively, the temperature should be kept at -40°C~85°C TA. Its type of program memory is FLASH. It has a number of 20I/Os. It has a base part number of DSPIC30F2010 that can be used to find other components that are comparable. QUAD is the location of its terminals. 28 terminationals are present. The dsPIC? 30F series contains this electrical component. Because of the 3V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are DIGITAL SIGNAL PROCESSOR, OTHER in order to monitor their performance. A number of 28 pins are used to construct it. It is mounted based on the method of Surface Mount. There are 28 pins on it. Subcategory Digital Signal Processors includes this component. The devices have a maximum memory size of 12kB that can be used to store programs and data. At a frequency of 20MHz, it exhibits excellent efficiency. A total of 3 timers/counters have been set up. A supply voltage (Vsup) above 2.5V is necessary for normal operation. It works with an oscillator type Internal.
DSPIC30F2010-20I/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F2010-20I/MM Applications
There are a lot of Microchip Technology DSPIC30F2010-20I/MM Microcontroller applications.
- Home video and audio
- Speed meter
- Answering machines
- Coffee machines
- Safety -airbags, automatic braking system (ABS)
- Scanners
- Radio
- PDAs, game consoles
- Refrigerators
- Home appliances
