DSPIC30F2010-20I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F2010 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Density | 96 kb |
| ROM (words) | 4096 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | TS 16949 |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 512 |
| Number of External Interrupts | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F2010-20I/SO Overview
It is available in the 28-SOIC (0.295, 7.50mm Width) package for the benefit of saving space. In this case, it is mounted using the method of Surface Mount. In the package Tube, it is included. Devices with dsPIC core processors are available. It is important to keep the temperature at -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. There are 20 I/Os on it. To find comparable components, use the DSPIC30F2010 base part number. This device has terminals at DUAL. As far as terminations are concerned, there are 28 terminations present. This electrical component is part of the dsPIC? 30F series. Because the supply voltage is 3V, high efficiency can be achieved. The gadget has DIGITAL SIGNAL PROCESSOR, OTHER as its uPs/uCs/peripheral IC. A number of 28 pins are used to construct it. According to Surface Mount, it is mounted. In total, it has 28 pins. In the subcategory of Digital Signal Processors, this component is included. Memory size for the devices is 12kB, which can be used to store programs and data. Using a frequency of 20MHz, it is very efficient. A total of 3 timers/counters have been set up. Normal operation requires a supply voltage (Vsup) that is higher than 2.5V. An oscillator type Internal is required for it to work.
DSPIC30F2010-20I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F2010-20I/SO Applications
There are a lot of Microchip Technology DSPIC30F2010-20I/SO Microcontroller applications.
- Dishwashers
- Oil and gas
- Multi-meter
- DVD\DV\MP3 players
- Dryers
- Fabric
- Projector
- Embedded gateways
- Air fryers
- Equipment control
