DSPIC30F2010-20I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | DSPIC30F2010 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| Nominal Supply Current | 36mA |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 16b |
| Density | 96 kb |
| EEPROM Size | 1K x 8 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 512 |
| Number of ADC Channels | 6 |
| Number of External Interrupts | 3 |
| Number of I2C Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F2010-20I/SP Overview
To save space, it is included in the 28-DIP (0.300, 7.62mm) package. A Through Hole mounting method is used. Package Tube contains it. Device with dsPIC core processor issupported. The temperature should be kept at -40°C~85°C TA while working. It has a type of program memory of FLASH. 20 I/Os are present on the device. To find comparable components, use the DSPIC30F2010 base part number. This device has terminals at DUAL. There are a total of 28 terminations in it. The electrical component is part of the series dsPIC? 30F. It is possible to achieve high efficiency with a 3V supply voltage. DIGITAL SIGNAL PROCESSOR, OTHER is the uPs/uCs/Peripheral IC chip in this gadget. The structure is composed of 28 pins. A method of mounting is used, which is Through Hole. It has a total of 28 pins on it. In Digital Signal Processors, this component is included. In the device, there is a memory capacity of 12kB which may be used to store programs and data. At a frequency of 20MHz, it exhibits excellent efficiency. There are 3 timers/counters. Normally, the supply voltage (Vsup) should remain above 2.5V. Using a Internal oscillator type, it works well.
DSPIC30F2010-20I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F2010-20I/SP Applications
There are a lot of Microchip Technology DSPIC30F2010-20I/SP Microcontroller applications.
- Keyboards
- Computers and laptops-video calling, email, blogging
- Air fryers
- Toys
- Smart highways (navigation, traffic control, information monitoring and car service)
- Automatic control
- Washing machines
- Accu-check
- Process control devices
- Hearing aids
