DSPIC30F2010-30I/SO
| Parameters | |
|---|---|
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 16b |
| Density | 96 kb |
| EEPROM Size | 1K x 8 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 512 |
| Number of ADC Channels | 6 |
| Number of External Interrupts | 3 |
| Number of I2C Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Height | 2.35mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F2010 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| Nominal Supply Current | 36mA |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
DSPIC30F2010-30I/SO Overview
Due to the benefits of saving space, it is available in the 28-SOIC (0.295, 7.50mm Width) package. Surface Mount is the way to mount it. A package of Tube contains it. A core processor of dsPIC is present in the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. It has a type of program memory of FLASH. A total of 20 I/Os are present. A component with the same part number as DSPIC30F2010 can be compared to other similar components. The terminals of this device are located at DUAL. This circuit consists of 28 terminationals. Part of the dsPIC? 30F series, this electrical component is used in a variety of applications. Because the supply voltage is 3V, high efficiency can be achieved. DIGITAL SIGNAL PROCESSOR, OTHER is the uPs/uCs/Peripheral IC chip in this gadget. The structure is composed of 28 pins. As a result, it is mounted in accordance with Surface Mount. There are a total of 28 pins on it. Digital Signal Processors contains this component. In the device, there is a memory capacity of 12kB which may be used to store programs and data. The system is highly efficient when working at a frequency of 30MHz. There are 3 timers/counters. Normal operation requires a supply voltage (Vsup) that is higher than 2.5V. An oscillator type Internal is required for it to work.
DSPIC30F2010-30I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F2010-30I/SO Applications
There are a lot of Microchip Technology DSPIC30F2010-30I/SO Microcontroller applications.
- Set-top boxes
- Washing machine
- Automatic control
- Calculators
- ECG machine
- Speed meter
- Glucose monitoring systems (for Type 1 Diabetes)
- Smartphones-calling, video calling, texting, email
- Dryers
- Air fryers
