DSPIC30F2010T-30I/MM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Digital Signal Processors |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F2010 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | TS 16949 |
| Integrated Cache | NO |
| RAM (words) | 512 |
| Number of External Interrupts | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC30F2010T-30I/MM Overview
For the purpose of saving space, it is available in the 28-VQFN Exposed Pad package. A Surface Mount mounting method is used. There is a Tape & Reel (TR) package available for it. A core processor of dsPIC is present in the device. Work should be performed at a temperature of -40°C~85°C TA. FLASH is the type of program memory used by it. 20 I/Os can be found on it. Based on the DSPIC30F2010 base part number, it can be compared with other components. A QUAD position is assigned to its terminals. This circuit consists of 28 terminationals. In the dsPIC? 30F series, this electrical component is found. The supply voltage of 3V allows for high efficiency. In this gadget, DIGITAL SIGNAL PROCESSOR, OTHER is the device's uPs/uCs/Peripheral IC. The structure is composed of 28 pins. Mounting is performed in accordance with Surface Mount. Total number of pins is 28. It is one of the components included in Digital Signal Processors. The devices have a maximum memory size of 12kB that can be used to store programs and data. At a frequency of 30MHz, it exhibits excellent efficiency. A total of 3 timers/counters have been set up. In order to maintain normal operation, Vsup must be above 2.5V. Internal is the oscillator type it uses.
DSPIC30F2010T-30I/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F2010T-30I/MM Applications
There are a lot of Microchip Technology DSPIC30F2010T-30I/MM Microcontroller applications.
- Security systems
- DCS control intelligent sensor
- Radio
- Projectors
- Xbox
- Multi-meter
- Embedded gateways
- Digital cameras
- Broadband technology, video and voice processing
- Mobile computers
