DSPIC30F2011-20E/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F2011 |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| Nominal Supply Current | 37mA |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 16b |
| ROM (words) | 4096 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 1024 |
| Number of ADC Channels | 8 |
| Height Seated (Max) | 2.64mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F2011-20E/SO Overview
There is an option to purchase it in the 18-SOIC (0.295, 7.50mm Width) package, which saves space. The way of mounting it is Surface Mount. You can find it in the package of Tube. Devices with dsPIC core processors are available. Maintain a temperature of -40°C~125°C TA while working. FLASH is the type of program memory used by it. A total of 12 I/Os are present. It has a base part number of DSPIC30F2011 that can be used to find other components that are comparable. At DUAL, its terminals are located. It has 18 terminationals. The electrical component is part of the series dsPIC? 30F. Because the supply voltage is 5V, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. There are 18 pins used in the construction of this device. Mounting is performed in accordance with Surface Mount. There are 18 pins on it. This is a component included in Digital Signal Processors. It is possible to store programs and data on the devices, as they have a memory size of 12kB. It is highly efficient when it works at a frequency of 20MHz. 3 timer/counters are present. Normal operation requires a supply voltage (Vsup) above 4.5V. Internal is the oscillator type it uses.
DSPIC30F2011-20E/SO Features
18-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F2011-20E/SO Applications
There are a lot of Microchip Technology DSPIC30F2011-20E/SO Microcontroller applications.
- Routers
- Projector
- Sonography (Ultrasound imaging)
- PDAs, game consoles
- Ipad
- Embedded gateways
- Fire detection & safety devices
- Guidance-GPS
- Electronic jamming systems
- Industrial robot
