Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-VQFN Exposed Pad |
Number of Pins |
28 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2006 |
Series |
dsPIC™ 30F |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Additional Feature |
ALSO OPERATES AT 2.5V SUPPLY AT 7.5MHZ |
Subcategory |
Digital Signal Processors |
Technology |
CMOS |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Frequency |
20MHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
DSPIC30F2011 |
Pin Count |
28 |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
4.5V |
Interface |
I2C, SPI, UART, USART |
Memory Size |
12kB |
Oscillator Type |
Internal |
Number of I/O |
12 |
RAM Size |
1K x 8 |
Voltage - Supply (Vcc/Vdd) |
2.5V~5.5V |
uPs/uCs/Peripheral ICs Type |
MICROCONTROLLER, RISC |
Core Processor |
dsPIC |
Peripherals |
Brown-out Detect/Reset, POR, PWM, WDT |
Program Memory Type |
FLASH |
Core Size |
16-Bit |
Program Memory Size |
12KB 4K x 24 |
Connectivity |
I2C, SPI, UART/USART |
Bit Size |
16 |
Data Converter |
A/D 8x12b |
Watchdog Timer |
Yes |
Has ADC |
YES |
DMA Channels |
NO |
Data Bus Width |
16b |
PWM Channels |
YES |
DAC Channels |
NO |
Number of Timers/Counters |
3 |
Density |
96 kb |
ROM (words) |
4096 |
On Chip Program ROM Width |
24 |
Format |
FIXED-POINT |
RAM (words) |
1024 |
Height Seated (Max) |
1mm |
Length |
6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
DSPIC30F2011-20I/ML Overview
To save space, it is included in the 28-VQFN Exposed Pad package. Using Surface Mount, it is mounted. This item can be found in package Tube. With a processor of dsPIC cores, the device is powered. The temperature should be kept at -40°C~85°C TA while working. It has a type of program memory of FLASH. 12 I/Os are present on the device. It has a base part number of DSPIC30F2011 that can be used to find other components that are comparable. A QUAD position is assigned to its terminals. In this case, there are 28 terminationals. There are a number of electrical components in the dsPIC? 30F series, including this one. By using a 5V voltage supply, high efficiency is possible. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. For its construction, 28 pins are used. It is mounted based on the method of Surface Mount. 28 pins are on it in total. It falls under the category of Digital Signal Processors. Memory size for the devices is 12kB, which can be used to store programs and data. Using a frequency of 20MHz, it is very efficient. There are 3 timers/counters. Moreover, it also has the property of ALSO OPERATES AT 2.5V SUPPLY AT 7.5MHZ. Vsup should be kept above 4.5V for normal operation. An oscillator type Internal is required for it to work.
DSPIC30F2011-20I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F2011-20I/ML Applications
There are a lot of Microchip Technology DSPIC30F2011-20I/ML Microcontroller applications.
- Robots
- Electronic jamming systems
- Blenders
- Mobile computers
- Switches
- Nintendo
- Routers
- Hand-held metering systems
- Hearing aids
- Industrial instrumentation devices