DSPIC30F2011-20I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | DSPIC30F2011 |
| Pin Count | 18 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 3 |
| Density | 96 kb |
| ROM (words) | 4096 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 2 |
| Height | 4.953mm |
| Length | 23.37mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F2011-20I/P Overview
Due to the benefits of saving space, it is available in the 18-DIP (0.300, 7.62mm) package. Using Through Hole, it is mounted. This item can be found in package Tube. The device has a dsPIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is its program memory type. The device has 12 I/Os. Based on its base part number of DSPIC30F2011, other similarly-sized components can be found. The terminals are positioned at DUAL. This circuit consists of 18 terminationals. An electrical component such as this is included in the series dsPIC? 30F. Using the 5V supply voltage allows for high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 18 pins are required to construct this device. Based on the Through Hole method, it is mounted. A total of 18 pins are attached to it. In the subcategory of Digital Signal Processors, this component is included. A device with a memory size of 12kB can store programs and data. This device achieves excellent efficiency at frequencies of 20MHz. While employing 3.3V, designers can maximize its supply voltage adaptability. A total of 3 timers/counters have been set up. Internal is the oscillator type it uses.
DSPIC30F2011-20I/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F2011-20I/P Applications
There are a lot of Microchip Technology DSPIC30F2011-20I/P Microcontroller applications.
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Fire alarms
- Magnetic resonance imaging (MRI)
- Nintendo
- Laminators
- Heater/Fan
- Speed meter
- 3D printers
- Projectors
- Current meter
