DSPIC30F2011-30I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F2011 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| Format | FIXED-POINT |
| Number of ADC Channels | 8 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F2011-30I/ML Overview
Due to its space-saving qualities, it is available in the 28-VQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. It comes in a Tube package. A core processor of dsPIC is present in the device. Maintain a temperature of -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. 12 I/Os are present on the device. To find comparable components, use the DSPIC30F2011 base part number. At QUAD, it has its terminals. There are a total of 28 terminations in it. The dsPIC? 30F series contains this electrical component. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. For its construction, 28 pins are used. According to Surface Mount, it is mounted. There are a total of 28 pins on it. In the subcategory of Digital Signal Processors, this component is included. In the device, there is a memory capacity of 12kB which may be used to store programs and data. The system is highly efficient when working at a frequency of 30MHz. A total of 3 timers/counters are present. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 4.5V. Internal is the oscillator type it uses.
DSPIC30F2011-30I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F2011-30I/ML Applications
There are a lot of Microchip Technology DSPIC30F2011-30I/ML Microcontroller applications.
- Gas monitoring systems
- Projectors
- Toasters
- Missile control
- Routers
- Dryers
- Smartphone
- Dishwashers
- Washing machines
- Kindle
