DSPIC30F2011-30I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F2011 |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 3 |
| Density | 96 kb |
| ROM (words) | 4096 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 2 |
| Height | 2.35mm |
| Length | 11.55mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F2011-30I/SO Overview
As a result, it is available in the 18-SOIC (0.295, 7.50mm Width) package. The way of mounting it is Surface Mount. It comes in the package?of a Tube. It is equipped with a dsPIC core processor. Working at -40°C~85°C TA temperature is recommended. Its type of program memory is FLASH. There are 12 I/Os on it. Based on the DSPIC30F2011 base part number, it can be compared with other components. At DUAL, it has its terminals. There are a total of 18 terminations in it. An electrical component such as this is included in the series dsPIC? 30F. It is possible to achieve high efficiency with a 5V supply voltage. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. The structure is composed of 18 pins. The mounting of this device is carried out following the method of Surface Mount. A total of 18 pins are attached to it. The component is included in Digital Signal Processors. In the device, there is a memory capacity of 12kB which may be used to store programs and data. This device achieves excellent efficiency at frequencies of 30MHz. In total, there are 3 timers and counters. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 4.5V. Using an oscillator type of Internal, it works.
DSPIC30F2011-30I/SO Features
18-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F2011-30I/SO Applications
There are a lot of Microchip Technology DSPIC30F2011-30I/SO Microcontroller applications.
- Industrial instrumentation devices
- Vacuum cleaners
- Mobile computers
- Laminators
- Set-top boxes
- Nintendo
- Refrigerators
- Automatic control
- Coffee machines
- Entertainment products
