DSPIC30F2011T-20E/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F2011 |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 1024 |
| Height Seated (Max) | 2.64mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F2011T-20E/SO Overview
For space savings, it is available in the 18-SOIC (0.295, 7.50mm Width) package. Using Surface Mount, it is mounted. Package Tape & Reel (TR) contains it. It is equipped with a dsPIC core processor. When working, the temperature should be kept at -40°C~125°C TA. Its type of program memory is FLASH. It has a number of 12I/Os. A comparable component can be found by using the base part number DSPIC30F2011. At DUAL, its terminals are located. A 18 termination is contained within it. dsPIC? 30F is the series number of this electrical component. By using a 5V voltage supply, high efficiency is possible. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. 18 pins are used to construct it. The method of Surface Mount is used to mount it. There are 18 pins on it. It is one of the components included in Digital Signal Processors. Data and programs may be stored on the devices which have a memory size of 12kB. At a frequency of 20MHz, it exhibits excellent efficiency. It appears that there are 3 timers/counters in use. Normally, the supply voltage (Vsup) should remain above 4.5V. Using a Internal oscillator type, it works well.
DSPIC30F2011T-20E/SO Features
18-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F2011T-20E/SO Applications
There are a lot of Microchip Technology DSPIC30F2011T-20E/SO Microcontroller applications.
- Firewalls
- Telephone sets
- Missile control
- 3D printers
- Leakage current tester
- Oscilloscopes
- Digital TVs
- Electronic jamming systems
- Toys
- Christmas lights
