DSPIC30F2012-20E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F2012 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| On Chip Program ROM Width | 24 |
| Number of Programmable I/O | 12 |
| Format | FIXED-POINT |
| RAM (words) | 1024 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F2012-20E/ML Overview
There is an option to purchase it in the 28-VQFN Exposed Pad package, which saves space. Surface Mount is the way to mount it. Package Tube contains it. There is a dsPIC as core processor in this device. During work, the temperature should remain at -40°C~125°C TA. The type of memory it uses is FLASH. A total of 20 I/Os are available on this device. To find comparable components, use the DSPIC30F2012 base part number. QUAD is the position of its terminals on the board. 28 terminationals are present. The electrical component is part of the series dsPIC? 30F. It is possible to achieve high efficiency with a 5V supply voltage. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. For its construction, 28 pins are used. Mounting is performed in accordance with Surface Mount. There are a total of 28 pins on it. The component is included in Digital Signal Processors. Data and programs may be stored on the devices which have a memory size of 12kB. It is highly efficient when it works at a frequency of 20MHz. There are currently 3 timers/counters set up on the system. 12 is the number of programmable I/O. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. Using oscillator type Internal makes it work.
DSPIC30F2012-20E/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F2012-20E/ML Applications
There are a lot of Microchip Technology DSPIC30F2012-20E/ML Microcontroller applications.
- Toasters
- Kindle
- Answering machines
- Light sensing & controlling devices
- Paper shredders
- Fabric
- Scanners
- Accu-check
- Xbox
- Laminators
