DSPIC30F2012-20E/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F2012 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| On Chip Program ROM Width | 24 |
| Number of Programmable I/O | 12 |
| Format | FIXED-POINT |
| RAM (words) | 1024 |
| Height Seated (Max) | 2.64mm |
| Length | 17.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F2012-20E/SO Overview
There is an option to purchase it in the 28-SOIC (0.295, 7.50mm Width) package, which saves space. Using Surface Mount, it is mounted. It is available in the Tube package. It is equipped with a dsPIC core processor. It is important to keep the temperature at -40°C~125°C TA while working. FLASH has been assigned to it as a program memory. A total of 20 I/Os are available on this device. It has a base part number of DSPIC30F2012 that can be used to find other components that are comparable. This device has terminals at DUAL. It has 28 terminationals. The dsPIC? 30F series contains this electrical component. As a result of the 5V supply voltage, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A total of 28 pins are used in its construction. This mount is done in accordance with the method of Surface Mount. A total of 28 pins are attached to it. This component is a part of Digital Signal Processors. A device with a memory size of 12kB can store programs and data. The system is highly efficient when working at a frequency of 20MHz. It appears that there are 3 timers/counters in use. There are a total of 12 programmable I/Os available. In order to maintain normal operation, Vsup must be above 4.5V. There is an oscillator type Internal used in this circuit.
DSPIC30F2012-20E/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F2012-20E/SO Applications
There are a lot of Microchip Technology DSPIC30F2012-20E/SO Microcontroller applications.
- Wastewater treatment
- Information appliances (networking of household appliances)
- Graphic terminals
- Robots
- Refrigerators
- Playstation
- Torpedo guidance
- Computed Tomography (CT scan)
- Electromechanical control
- Air fryers
