DSPIC30F2012-20I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2.5V SUPPLY AT 7.5MHZ |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F2012 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Density | 96 kb |
| ROM (words) | 4096 |
| Number of Programmable I/O | 12 |
| Format | FIXED-POINT |
| Number of ADC Channels | 10 |
| Number of I2C Channels | 1 |
| Height | 2.35mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F2012-20I/SO Overview
As a result, it is available in the 28-SOIC (0.295, 7.50mm Width) package. It is mounted using the way of Surface Mount. It comes in a Tube package. It is equipped with a dsPIC core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. 20 I/Os can be found on it. It has a part number of DSPIC30F2012 that can be used to locate similar components. At DUAL, its terminals are located. In this case, there are 28 terminationals. dsPIC? 30F is the series number of this electrical component. The supply voltage of 5V allows for high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. There are 28 pins used in the construction of this device. According to Surface Mount, it is mounted. Total number of pins is 28. It falls under the category of Digital Signal Processors. Data and programs may be stored on the devices which have a memory size of 12kB. When working at a frequency of 20MHz it is able to achieve excellent efficiency. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. A total of 3 timers/counters are present. The number 12 represents the number of programmable I/O ports on the board. Moreover, it also has the property of ALSO OPERATES AT 2.5V SUPPLY AT 7.5MHZ. There is an oscillator type Internal used in this circuit.
DSPIC30F2012-20I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F2012-20I/SO Applications
There are a lot of Microchip Technology DSPIC30F2012-20I/SO Microcontroller applications.
- Temperature sensing and controlling devices
- Traditional industrial transformation
- Wastewater treatment
- Projector
- Toasters
- Switches
- Fabric
- Information appliances (networking of household appliances)
- Hard drives
- Data acquisition and control
