DSPIC30F2012-20I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Frequency | 20MHz |
| Base Part Number | DSPIC30F2012 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x12b |
| Watchdog Timer | Yes |
| Data Bus Width | 16b |
| Number of Timers/Counters | 3 |
| Density | 96 kb |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 12 |
| Format | FIXED-POINT |
| Number of ADC Channels | 10 |
| Number of PWM Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
DSPIC30F2012-20I/SP Overview
There is an option to purchase it in the 28-DIP (0.300, 7.62mm) package, which saves space. Mounted using Through Hole. In the package Tube, it is included. It is equipped with a dsPIC core processor. Working at -40°C~85°C TA temperature is recommended. FLASH has been assigned to it as a program memory. It has a number of 20I/Os. Other components that are comparable to it have the base part number DSPIC30F2012. DUAL is the position of its terminals on the board. As far as terminations are concerned, there are 28 terminations present. In the dsPIC? 30F series, this electrical component is found. It is constructed using 28 pins. During the mounting process, the device is mounted based on the Through Hole method. It is equipped with 28 pins in total. It falls under the category of Digital Signal Processors. A device with a memory size of 12kB can store programs and data. The system is highly efficient when working at a frequency of 20MHz. While employing 3.3V, designers can maximize its supply voltage adaptability. There are 3 timers/counters. There are a total of 12 programmable I/Os. An oscillator of type Internal is used.
DSPIC30F2012-20I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F2012-20I/SP Applications
There are a lot of Microchip Technology DSPIC30F2012-20I/SP Microcontroller applications.
- Smart instruments
- Industrial instrumentation devices
- 3D printers
- Home video and audio
- Smart highways (navigation, traffic control, information monitoring and car service)
- Keyboards
- Heater/Fan
- DDC control
- Radio
- Xbox
