DSPIC30F2012-30I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ALSO OPERATES AT 2.5V MINIMUM SUPPLY AT 10MHZ |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F2012 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 12kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 12KB 4K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| On Chip Program ROM Width | 24 |
| Number of Programmable I/O | 12 |
| Format | FIXED-POINT |
| RAM (words) | 1024 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F2012-30I/ML Overview
For space savings, it is available in the 28-VQFN Exposed Pad package. The way of Surface Mount is used to mount it. In the package Tube, it is included. A dsPIC core processor powers the device. Work should be done at -40°C~85°C TA. FLASH is its program memory type. It has a number of 20I/Os. It has a base part number of DSPIC30F2012 that can be used to find other components that are comparable. A QUAD position is assigned to its terminals. It consists of 28 terminationals. Part of the dsPIC? 30F series, this electrical component is used in a variety of applications. Because the supply voltage is 5V, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. There are 28 pins used in the construction of this device. The method of Surface Mount is used to mount it. There are 28 pins on it. It is one of the components included in Digital Signal Processors. Memory size for the devices is 12kB, which can be used to store programs and data. Working at a frequency of 30MHz results in excellent efficiency. 3 timers/counters are in use. A chip with 12 programmable inputs/outputs is available. Moreover, it also has the property of ALSO OPERATES AT 2.5V MINIMUM SUPPLY AT 10MHZ. In order to maintain normal operation, Vsup must be above 4.5V. Using oscillator type Internal makes it work.
DSPIC30F2012-30I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F2012-30I/ML Applications
There are a lot of Microchip Technology DSPIC30F2012-30I/ML Microcontroller applications.
- Smartphone
- PDAs, game consoles
- Automatic staplers
- Mice
- Ipad
- Vacuum cleaners
- Traditional industrial transformation
- Digital TVs
- Blenders
- Multi-meter
