DSPIC30F3010-20I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3010 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 8192 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 512 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC30F3010-20I/ML Overview
There is a 44-VQFN Exposed Pad package available to save space. Mounted using Surface Mount. You can find it in the package of Tube. A core processor of dsPIC is present in the device. Work should be performed at a temperature of -40°C~85°C TA. The type of memory in which this program is stored is FLASH. 20 I/Os are present on the device. Based on its base part number of DSPIC30F3010, other similarly-sized components can be found. This device has terminals at QUAD. Currently, it consists of 44 terminationals. The electrical component is part of the series dsPIC? 30F. It is possible to achieve high efficiency with a 5V supply voltage. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A number of 44 pins are used to construct it. According to Surface Mount, it is mounted. On it, there are 44 pins. It belongs to the subcategory Digital Signal Processors. Data and programs can be stored on the devices with a memory size of 24kB. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. Using 3.3V's adaptability as a supply voltage allows designers to maximize its use. There are currently 5 timers/counters set up on the system. Using a Internal oscillator type, it works well.
DSPIC30F3010-20I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3010-20I/ML Applications
There are a lot of Microchip Technology DSPIC30F3010-20I/ML Microcontroller applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- Fire detection & safety devices
- Ipod
- Smart instruments
- Information appliances (networking of household appliances)
- Fabric
- Leakage current tester
- Laminators
- Christmas lights
- Walkie talkies
