DSPIC30F3010-20I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3010 |
| Pin Count | 28 |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| Nominal Supply Current | 41mA |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| Density | 192 kb |
| ROM (words) | 8192 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 512 |
| Number of ADC Channels | 6 |
| Length | 17.87mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F3010-20I/SO Overview
For space savings, it is available in the 28-SOIC (0.295, 7.50mm Width) package. The way of Surface Mount is used to mount it. There is a Tube package available for it. dsPIC core processor is present on the device. Maintain a temperature of -40°C~85°C TA while working. It has a type of program memory of FLASH. A total of 20 I/Os are present. A comparable component can be found by using the base part number DSPIC30F3010. This device has terminals at DUAL. 28 terminations are present in it. There are a number of electrical components in the dsPIC? 30F series, including this one. The 5V supply voltage enables high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. The structure is composed of 28 pins. It is mounted based on the method of Surface Mount. This device has a total of 28 pins. It falls under the category of Digital Signal Processors. It is possible to store programs and data on the devices, as they have a memory size of 24kB. Working at a frequency of 20MHz results in excellent efficiency. 5 counters/timers are currently active. Internal is the oscillator type it uses.
DSPIC30F3010-20I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3010-20I/SO Applications
There are a lot of Microchip Technology DSPIC30F3010-20I/SO Microcontroller applications.
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Heart rate monitors
- PDAs, game consoles
- X-ray
- Volt meter
- Gas monitoring systems
- Missile control
- Washing machines
- Robotic prosthetic limbs
- DVD\DV\MP3 players
