DSPIC30F3011-20E/P
| Parameters | |
|---|---|
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | DSPIC30F3011 |
| Pin Count | 40 |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 8192 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 512 |
| Height Seated (Max) | 4.83mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
DSPIC30F3011-20E/P Overview
For space savings, it is available in the 40-DIP (0.600, 15.24mm) package. In this case, it is mounted using the method of Through Hole. Package Tube contains it. Devices with dsPIC core processors are available. When working, it is recommended that the temperature be kept at -40°C~125°C TA. FLASH is the type of program memory used by it. A total of 30 I/Os are available on this device. It has a part number of DSPIC30F3011 that can be used to locate similar components. A DUAL position is assigned to its terminals. As far as terminations are concerned, there are 40 terminations present. In the dsPIC? 30F series, this electrical component is found. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. The structure is constructed from 40 pins. A method of mounting is used, which is Through Hole. Total number of pins is 40. In Digital Signal Processors, this component is included. The devices have a maximum memory size of 24kB that can be used to store programs and data. The system is highly efficient when working at a frequency of 20MHz. A total of 5 timers/counters have been set up. Using an oscillator type of Internal, it works.
DSPIC30F3011-20E/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F3011-20E/P Applications
There are a lot of Microchip Technology DSPIC30F3011-20E/P Microcontroller applications.
- Fire detection & safety devices
- Nintendo
- Copiers
- Computed Tomography (CT scan)
- Fax machines
- Traditional industrial transformation
- Virtual reality VR robots
- Removable disks
- Smart instruments
- Calculator
