DSPIC30F3011-20E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3011 |
| Pin Count | 44 |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 8192 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 512 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F3011-20E/PT Overview
There is an option to purchase it in the 44-TQFP package, which saves space. Using Surface Mount, it is mounted. There is a Tray package available for it. Devices with dsPIC core processors are available. It is important to keep the temperature at -40°C~125°C TA while working. The type of memory it uses is FLASH. There are 30 I/Os on it. A component with the same part number as DSPIC30F3011 can be compared to other similar components. The terminals of this device are located at QUAD. There are a total of 44 terminations in it. Part of the dsPIC? 30F series, this electrical component is used in a variety of applications. Using the 5V supply voltage allows for high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 44 pins are required to construct this device. According to Surface Mount, it is mounted. In total, it has 44 pins. It belongs to the subcategory Digital Signal Processors. The devices have a memory size of 24kB that can be used to store programs and data. At a frequency of 20MHz, it exhibits excellent efficiency. The number of timers and counters is 5. The oscillator type Internal is used to operate the device.
DSPIC30F3011-20E/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3011-20E/PT Applications
There are a lot of Microchip Technology DSPIC30F3011-20E/PT Microcontroller applications.
- Laminators
- Wastewater treatment
- Washing machines
- Removable disks
- Instrument control
- Projectors
- Electrocardiogram (EKG)
- Electromechanical control
- DDC control
- Heater/Fan
