DSPIC30F3011-30I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F3011 |
| Pin Count | 44 |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| EEPROM Size | 1K x 8 |
| Format | FIXED-POINT |
| RAM (words) | 512 |
| Number of UART Channels | 2 |
| Number of ADC Channels | 9 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC30F3011-30I/ML Overview
To save space, it is included in the 44-VQFN Exposed Pad package. Surface Mount is used for mounting. This item can be found in package Tube. A dsPIC core processor powers the device. The temperature should be kept at -40°C~85°C TA while working. In terms of its program memory type, it is FLASH. 30 I/Os can be found on it. A component with the same part number as DSPIC30F3011 can be compared to other similar components. The terminals are positioned at QUAD. In this case, there are 44 terminationals. The electrical component is part of the series dsPIC? 30F. As a result of the 5V supply voltage, high efficiency is possible. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. There are 44 pins used in the construction of this device. A method of mounting is used, which is Surface Mount. There are 44 pins on it. This is a component included in Digital Signal Processors. Data and programs can be stored on the devices with a memory size of 24kB. It is highly efficient when it works at a frequency of 30MHz. In total, there are 5 timers and counters. It works with an oscillator type Internal.
DSPIC30F3011-30I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F3011-30I/ML Applications
There are a lot of Microchip Technology DSPIC30F3011-30I/ML Microcontroller applications.
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Communication-bluetooth, Wi-Fi, radio
- Smartphone
- Industrial instrumentation devices
- Heater/Fan
- Laminators
- Smart instruments
- Current meter
- Torpedo guidance
- Missile control
